Knowledgebase: FuseMail
Fusemail IP Addresses, MX records, Smarthost and SPF record information
Posted by on 21 October 2016 05:14 PM

GETTING STARTED


MX Records & Outbound Smarthosts


United States


In order for us to filter your emails, you will need to change your MX records to point at our service.

Your MX records should include your own 'main' domain name as a prefix. You should use the same MX records for all domains you add to our system.

Example: If your main domain name is 'example.com', your MX records should read:

 


MX Record

Priority

example-com.mx1-us.mailanyone.net. 10
example-com.mx2-us.mailanyone.net. 20
example-com.mx3-us.mailanyone.net. 30


We also encourage you to relay your outbound mail through our service to enable the full range of functionality. To do this, you will need to configure a smarthost or outbound relay addresses on your mail server.

Example: If your main domain name is 'example.com', your smarthosts should read:

 


Smarthost

example-com.outbound1-us.mailanyone.net


Firewall IP ranges

 

To ensure spammers cannot bypass our system and deliver mail directly to your server, we recommend you lock down your network so that your mailserver is only able to receive SMTP connections from our platform. To ensure that this is achieved, please configure your firewall or mail server to only accept connections on port 25 from only the IP ranges below:

Recommended - For maximum redundancy, allow access from all of our US ranges:

 

Subnet IP

 

 

Subnet Mask

 

 

 

Net Mask

 

 

 

IP Range

208.70.128.0

 

 

255.255.252.0

 

 

 

/21

 

 

 

208.70.128.0 - 208.70.136.255

72.35.12.0

 

 

255.255.255.0

 

 

 

/24

 

 

 

72.35.12.0 - 72.35.12.255

72.35.23.0

 

 

255.255.255.0

 

 

 

/24

 

 

 

72.35.23.0 - 72.35.23.255

 


SPF Text Record

 

We encourage setting up an SPF text record in your domains DNS which designates our SMTP mail servers as authorized servers to send on behalf of your domain. Please note that if you do not already have an SPF text record you will need to add in IP's and domains that encompass ALL of the mail servers that you use to send mail from.

 

v=spf1 include:mailanyone.net ~all


ERROR: This domain name does not match domain registered in the license key file (cms.orlinpilot.com), allowed domains: support.excelmicro.com,localhost, please change the product path to match the domain under Admin CP > Settings > General Settings
This product will not work properly unless untill that value is changed.

For more information please contact Kayako support at https://my.kayako.com