Knowledgebase
Bounceback received on outbound relay. SMTP error message: "delivery temporarily suspended: connect to [XXX.XXX.XXX.XXX]:25: Connection timed out.
Posted by on 01 July 2014 10:29 AM
Bounceback received on outbound relay. SMTP error message: "delivery temporarily suspended: connect to [XXX.XXX.XXX.XXX]:25: Connection timed out.

The bounceback is required to investigate the logs of the destination SMTP server. Problems of this nature are usually a poor quality SMTP server, a broken firewall or router in place between our servers and the destination server (dropping ICMP packets, for example), or improper MTU configuration on the destination server/network. You can view this information via the outbound logs or via the bounceback email received.

 

Resolution - How to identify the point of failure

 

-Review email logs

To access email logs:

  1. Log in to the Proofpoint Essentials user interface
  2. Type the customer name into the search bar (top header)
  3. Click on Logs
  4. Select user (or search for user and select)
  5. Click Logs to the right of the user name
  6. Change Type to Outbound
  7. Change Status to Any
  8. Click Search
  9. Click Detail button next to the message

 

-Telnet Connection

One of the first steps to identify the issue would be to perform a telnet connection to the recipient SMTP server on port 25 and confirm if a successful connection to the mail server can be made. telnet [Receiving SMTP Server] 25 

 

-Packet Capture 

Using a packet capture tool like Wireshark can help identify where the connection is timing out and may provide more information for the reason why.

 

-Traceroute / TCPTraceroute

Using traceroute or tcptraceroute will display each hop as the packet tries to reach the destination SMTP server. Traceroute relys on ICMP or UDP protocols, although firewalls and routers usually block the ICMP protocol which is why it may be more beneficial to use tcptraceroute which uses the TCP protocol.

 


ERROR: This domain name does not match domain registered in the license key file (cms.orlinpilot.com), allowed domains: support.excelmicro.com, please change the product path to match the domain under Admin CP > Settings > General Settings
This product will not work properly unless untill that value is changed.

For more information please contact Kayako support at https://my.kayako.com